Changes in Workbench Hardware and Cabinet legs

Workbench Hardware Change

Recently we learned the ‘9.5mm x 48mm End Dowel’ was discontinued by Titus. This has long been used to attach vertical partitions to workbench bases. There were no other options than to change the design. 

You will now see a 5MM hole in the base bottom and the cam location has been moved on the partition. You will now use the same ‘Screw in Dowel – Hang Cleats’ that is used to attach the workbench top.

Private Label Leg Change

The plastic leg for the private label cabinets have been discontinued and replaced with a metal leg. We now have 2 different leg height options so please keep in mind the following information when purchasing Private Label.

All cabinets will come with our standard 4″-6″H cabinet leg. If you need your leg to be more than 6″, you will need to swap out the standard leg for our other leg that is 6″-8″H.

These new cabinet legs no longer have an extension option.

These new legs use a 11mm euro screw. The same screw that we use to secure the drawer slides.

New 4″-6″ metal cabinet leg

New 6″-8″ metal cabinet leg